Is it possible to fully inspect an empty pool? | | Yes, always | 12% | | In most cases | 8% | | In some cases | 12% | | No, never | 66% | | | | | Question: Is it possible to fully inspect an empty pool? Top Answer (66% of 24 votes): No, never.
Answer: In some cases
Explanation: Yes, it is possible to fully inspect an empty pool. Inspectors can evaluate the pool's structure, looking for cracks, damage, or deterioration in the walls and floor. They can also check the plumbing, tile, and coping for issues. However, some components, such as the filtration system and water quality, cannot be assessed without water in the pool. An empty pool inspection provides valuable information about the condition of the pool but may require follow-up once the pool is filled and operational.
| | PoolLogic Pool and Spa Service | Answer: No, never
Explanation: Can not test the equipment with out proper water level. | | AAA Pool Inspector | Answer: In most cases
Explanation: Pools should never be left empty to an extended period of time. A pool needs the weight of the water in it to keep the pool in the ground. A pool is like a boat and when the hydrostatic pressure under the pool gets greater that the weight of the shell it can float the pool out of ground causing damage to the shell and plumbing.
When a pool is temporarily emptied for service or repair the hydrostatic plugs in the bottom of most pools must be removed, while the pool is empty.
A pool that has emptied on it own is a red flag and the shell or liner must be inspected for cracks, bad seals or holes in the vinyl liner.
Additional inspection and repair from a leak detection company may be needed to identify the reason the pool lost it water and what repairs are needed. | | Pool Inspections by Howard | | | ProMatcher | Answer: No, never
Explanation: No it would take water to complete inspection of equipment... | | North State Inspections | Answer: No, never
Explanation: Can't check pressures and pump operation properly. | | Royalty Home Solutions, Inc | Answer: No, never
Explanation: You can do a partial inspection but not full | | At Ease Home Inspection | | | ProMatcher | Answer: No, never
Explanation: partialy | | A & H PROPERTIES | Answer: No, never
Explanation: It's not possible to fully inspect the pumps, filters, and other equipment. | | MJ Services | Answer: Yes, always
Explanation: yes- you can inspect the structure of the pool, but with it being empty, you are unable to test the mechanical aspect of the pool working | | JKM Home Inspections |
|